Infrared Photography (Sample Shoot)

My first take on infrared (IR) photography was a disaster and so I took a handful of sample shots again this morning using the same subject. To start with, you must need an IR filter for this particular shoot. You must take note, however, that IR filters may not work well with other cameras especially modern digital SLRs. Higher megapixels make your camera less sensitive to IR light. I suggest you check first whether your camera is up for this adventure. You could find some articles about this online.

Let's get started!

• Set your camera to its lowest ISO setting;
• Mount your camera on a tripod, very important tool you must use in IR photography since you will be using slow shutter speeds here;
• Attach the IR filter on your lens. I know, you cannot see a thing but do not fret. Remove the filter and compose your subject. Try adjusting your aperture to reduce depth of field;
• Now, try taking a photo and then check it to see what needs to be adjusted. 
• You could try different shutter speeds to determine if your shot is under or overexposed;
• If you are not satisfied with the results, it's alright. It will really take you and I some time to fully understand the idea of composing and capturing with IR photography. Take your time and keep on shooting.

Here are some sample shots. Very basic and obviously needs improvement. :)

 ISO 200      38 mm      f/5.0     6.0 sec

 Edited version. Colors modified.